Difference between revisions of "Voltage Regulator"

From Citroen SM Wiki
Line 9: Line 9:
 
* Fit a Ford external regulator (e.g. 1982 Ford Mustang) "I,A,S,F" terminals of Ford Regulator go to wires "L, Bat, R and EXC" from Citroen Voltage Regulator.  It is also possible to fit an aftermarket miniature Ford voltage regulator inside the OEM regulator can.
 
* Fit a Ford external regulator (e.g. 1982 Ford Mustang) "I,A,S,F" terminals of Ford Regulator go to wires "L, Bat, R and EXC" from Citroen Voltage Regulator.  It is also possible to fit an aftermarket miniature Ford voltage regulator inside the OEM regulator can.
  
Electronic_voltage_regulator_in_OE_can.jpg
+
 
 +
 
 +
[[Image:Electronic_voltage_regulator_in_OE_can.jpg|left|400px|thumb|Miniature Ford Regulator inside OE housing]]
 +
 
 +
<br clear="all"/>
 +
 
  
  

Revision as of 17:38, 5 August 2018

The original regulator ...

  • problems...?
    • The metal cover can short out. Fit a fuse to the supply wire at the top of the regulator.
  Incorrect charging may be the body of the regulator is not directly connected to the battery negative (O.E. is a yellow wire).     
  High charging can be caused by a low voltage in the regulator supply wire. First check for bad contacts elsewhere.

There are a number of alternatives:

  • Fit a Ford external regulator (e.g. 1982 Ford Mustang) "I,A,S,F" terminals of Ford Regulator go to wires "L, Bat, R and EXC" from Citroen Voltage Regulator. It is also possible to fit an aftermarket miniature Ford voltage regulator inside the OEM regulator can.


Miniature Ford Regulator inside OE housing




  • alternator with internal regulator


If you want to keep the stock appearance, you can embed a modern regulator in the old regulator can. See Regulator.pdf for one approach.

See also